$300 Off Arctic Storm Snow Blowers | Shop Now

How to Replace the Wheel on a Troy-Bilt Walk Behind Mower

This video will show you how to replace a wheel on this Troy-Bilt walk behind mower. Depending on your model, the instructions in this video may vary slightly. Always be sure to check your operator's manual for detailed instructions.

Instructions

Step 1
Make sure the engine is cool. Disconnect the spark plug ignition wire.

Step 2
Put the height adjuster at the highest level.

Step 3
Using a socket, unbolt the wheel and remove it from the mower.

Step 4
Lubricate the new wheel's bushings with a dry lubricant like graphite.

Step 5
Tighten the wheel nut and adjust the height of the wheel to match the other three.

Step 6
Reconnect the spark plug ignition wire.